Epoxy flooring in West Chicago, explained

Epoxy flooring is a resin coating bonded into your concrete and sealed under a polyaspartic topcoat. A primer fuses into the ground slab, a pigmented base coat goes down, and the finish you choose is applied on top, so the whole floor is one seamless, non-porous surface with no joints for fluid to find its way into. The topcoat is abrasion-resistant and UV stable, and it takes the wear of boots, wheels and dropped tools so the layers beneath stay protected.

It suits the vehicle and trade side of West Chicago: repair and body shops, tire and exhaust bays, equipment stores, trade counters, yards and workshops. It suits home garages and basements just as well, because the system stays the same and only the finish changes. A shop floor and a house garage are built the same way, from the same layers, and what differs is the finish chosen for the way the space is used and how much grip it needs.

The finished floor is hard, sealed and either lightly textured or glossy, and it is easy to keep clean. For a home garage, our page on garage floor epoxy in West Chicago goes through the install steps in order.

Why a floor that sees fluids needs epoxy

Resists the spills that ruin bare concrete. Oil, chemicals and hot tire pick-up soak into an unsealed slab and stay there, but sit on top of an epoxy floor and wipe away. The coating is seamless and non-porous, so nothing is trapped in joints or pores, it does not harbor mold or bacteria, and it protects the slab from moisture and water damage. Road salt tracked in through the door does the same, and it rinses off.

Grip and staying power. Flake has an orange-peel texture that grips, and an anti-slip additive can be added to a smooth finish where a floor will be wet. The primer fuses into the concrete so it does not peel, and the UV-stable topcoat does not yellow, which gives a floor that can last fifteen to twenty years. Cleaning is a sweep and a mop, with no stripping or waxing, and the finish is low odor and low VOC.

Epoxy finishes for West Chicago shops and garages

Epoxy flake is the working finish for most bays and garages. Colored flakes are broadcast into the pigmented base coat and sealed under the clear topcoat, so the texture grips and the blend hides the marks of a busy day, from tire marks to dropped grit. It is the most durable epoxy system, weather- and waterproof, and cost-effective against replacing a floor. Flake sizes and color blends vary, and a worn flake floor can be refreshed with a new topcoat, with damaged areas re-flaked.

Metallic epoxy is a self-leveling resin mixed with metallic mica pigments and worked by hand, with the high-gloss look of marble, liquid metal or stone. It is one of the thickest epoxy systems, so it also levels an uneven slab. It suits a showroom, a trade counter or an office, lit by artificial light, where the floor is part of the first impression.

Solid color epoxy is one uniform shade under the topcoat, the plain choice for a workshop, plant store or yard office, and a light tone brightens a bay. It wipes clean and shows what has been dropped, so a tool, a bolt or a spill is easy to spot and deal with. An anti-slip additive can be added to its topcoat on request where the floor will be wet or oily, and it is low odor and low VOC for those working on it all day. For warehouse and production floors specified around traffic, see industrial floor coating in West Chicago.

(630) 206-5602

Get A Quote

How a West Chicago slab is ground and repaired

Preparation starts with diamond grinding, which takes off old paint, coatings, stains, dirt and contaminants and opens the pores of the concrete. That matters most on shop floors where oil has been, because a coating bonds to the clean concrete under the surface, not to what has soaked into it. Any old sealer on the slab comes off in the same pass. Cracks, holes and imperfections are then repaired, so that the coating goes onto a sound, even surface, and cove at the walls is an option. A coating shows what is under it, which is why this stage is never skipped, and why it decides how long the finished floor lasts.

Installation follows in layers: the primer that fuses into the concrete, the pigmented base coat, the finish stage, whether flake broadcast, metallic worked by hand or solid color coats, and the polyaspartic topcoat, abrasion-resistant and glossy. A garage floor is coated in a day. Each layer has a job, and together they make one bonded system rather than a paint film on top of the slab.

Epoxy floors around West Chicago, and a free visit

Epoxy goes into West Chicago repair and body shops, trade units, workshops and house garages, installed by our own crew from the shop in Roselle. We are owned and operated by a Marine Corps veteran, licensed and insured, with an extended warranty on craftsmanship. Ask for the free visit and we will look at the floor, advise on the finish and quote the job. Call (630) 206-5602 or email info@evolveconcretecoating.com, and ask about discounts for military, veterans and first responders.

Epoxy Flooring West Chicago

Epoxy flooring in West Chicago, explained

Why a floor that sees fluids needs epoxy

Epoxy finishes for West Chicago shops and garages

How a West Chicago slab is ground and repaired

Epoxy floors around West Chicago, and a free visit

Automotive

Retail

Restaurants

Vet Clinics

Hospitals

Schools

Office Buildings

Grocery Stores

Hotels

Areas We Serve

Every Floor Starts With a FREE Estimate

Phone

Email

Hours

Address

Contact Us