Epoxy Flooring Elk Grove Village, IL

Epoxy floors for Elk Grove Village warehouses, workshops, shops and garages: a seamless, chemical-resistant floor bonded into your slab and installed by our own crew.
Solid gray epoxy floor with a high-gloss finish in a warehouse

A bonded epoxy floor for Elk Grove Village units

Epoxy flooring is a resin system bonded into the slab. A primer fuses into the ground concrete, a pigmented base coat goes on, the finish you choose follows, and a polyaspartic topcoat is applied over it all. It sets into one seamless, non-porous floor with no joints, so dirt, oil and water have nowhere to settle and nothing is left to peel.

It is for the warehouses, workshops, distribution and light-industrial units, shops and offices that fill a town like Elk Grove Village, and for homeowners with a garage or basement to finish. A working floor and a customer-facing floor use the same system with a different finish, so one crew and one build cover every space on a site. The topcoat is polyaspartic, abrasion-resistant and glossy, and it is what takes the traffic of boots, wheels and pallet trucks across the surface.

Interior of a clean, spacious commercial garage with a shiny polished floor and several parked cars.
Gray and gold metallic epoxy floor running up to a stone fireplace

Why epoxy outperforms bare concrete in a working unit

Bare concrete dusts, stains and soaks up whatever lands on it. Epoxy resists oil, chemicals, hot tire pick-up, road salt, abrasion and impact, and the primer fuses into the slab so the coating does not peel. Pallet trucks, dropped tools and leaking vehicles mark it far less, and the coating protects the concrete underneath from moisture and water damage.

The upkeep is light and the life is long. A seamless, non-porous surface cleans with a sweep and a mop, with no stripping or waxing, and the finish is low odor and low VOC, which matters in an office or a unit with staff on site all day. The UV-stable topcoat does not yellow or fade, and, because the surface is seamless, there are no joints for chemicals or water to work into. Coated well, a floor can still look good fifteen to twenty years on, a better return than replacing or tiling it.

Which epoxy finish suits an Elk Grove Village unit?

Solid color epoxy is the plain working finish: one uniform shade under a clear topcoat that wipes clean, shows what has been dropped and, in a light tone, brightens a bay or storeroom with little daylight. Where a floor will be wet or oily, an anti-slip additive can be added on request. It is also the simplest finish to keep consistent across a large floor, and it can be applied in coats to build the same even color from wall to wall.

Epoxy flake and metallic cover the rest. Flake broadcasts colored flakes into the pigmented base coat for a grippy, forgiving orange-peel texture that hides the marks of a working day, and a worn flake floor can be refreshed with a new topcoat and damaged areas re-flaked. Metallic is a self-leveling resin with mica pigments worked by hand, a high-gloss floor in marble or liquid-metal looks for an office, showroom or reception, and an anti-slip agent can go into its final coat.

Dark textured epoxy floor in a commercial space during fit-out

Preparation and installation for Elk Grove Village floors

Preparation is mechanical grinding to remove old paint, coatings, stains, dirt and contaminants and open the pores of the concrete, followed by repairs to cracks, holes and joints. Any old sealer on the slab comes off in the grind. Cove at the walls can be added as an option. A coating only lasts as well as the surface it is bonded to, so this stage decides how the floor holds up.

Then comes the installation: the primer that fuses into the concrete, the pigmented base coat, the finish stage, whether flake broadcast, metallic worked by hand or solid color coats, and the polyaspartic topcoat that takes the abrasion and gives a glossy, UV-stable surface. Garage floors are coated in a day.

Bare concrete slab during preparation, before the coating goes down

Epoxy floors around Elk Grove Village

Floors like this go into Elk Grove Village workshops, warehouses, shops and offices, and into house garages. We install with our own crew, based at our shop in Roselle, and we are licensed and insured, with an extended warranty on craftsmanship. Ask for the free visit, which gives us the chance to look at the floor, suggest the right finish and quote the job. Call (630) 206-5602 or email info@evolveconcretecoating.com.

Areas We Serve

Proudly delivering professional concrete coatings across these Illinois suburbs and surrounding communities.

Every Floor Starts With a FREE Estimate

Contact Us

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.