Epoxy Flooring Hanover Park, IL

Epoxy flooring for Hanover Park work garages, shops and light industrial floors: a seamless coating over the slab, in solid color, flake or metallic, installed by our own crew.
Light gray epoxy flake floor in a basement with painted ceiling joists

What epoxy flooring is made of

Epoxy flooring is a multi-layer coating, not a single coat of paint. Grinding opens the concrete, a primer fuses into it, a base coat carries the color, the chosen finish goes on top, and a polyaspartic topcoat takes the wear. Because the layers bond into the slab, the floor does not peel.

In Hanover Park it fits garages used as workshops by people who fix things and build things, along with manufacturing floors, shops, offices, showrooms and clinics. The same system covers a home basement and a business floor, with the finish chosen to match the use.

The finished floor is seamless and glossy, with nothing to soak up spills. Liquids, dirt and bacteria have no pores to settle into, and the color can be a plain solid, a flake blend or a metallic effect.

Gray epoxy flake floor in an attached garage with steps up to the house
Black and white metallic epoxy floor

Benefits of epoxy for Hanover Park work floors

Resists the mess of work. Oil, solvents, grease and chemicals stay on top of a non-porous surface where they can be wiped away, and the coating stands up to abrasion and impact. Wipes clean. With no seams or grout, a mop and soap and water handle the daily cleanup, and there is no stripping or waxing.

Safer underfoot. Flake gives an orange-peel grip on floors that get wet, and an anti-slip additive can go into smooth finishes on request. Holds up to heavy loads. Jack stands, carts and rolling equipment meet a surface built for it, and the primer's bond keeps the coating from peeling. Low odor and low VOCs make it easier to work around while it goes down.

Cost-effective and long-lived. It costs less than replacing the floor, and with good preparation it can look good for 15 to 20 years. No demolition is involved, since the coating goes on the slab you already have.

Solid color, flake and metallic epoxy compared

Solid color epoxy is the workhorse for shop floors and working garages. It goes down as even coats of a single color, which brightens the space and gives a clean, plain surface that is easy to keep. Where the job is production or repair rather than display, this is usually where we start.

Epoxy flake adds color blends and texture. Flakes broadcast into the base coat give a speckled finish that hides dirt, and the orange-peel surface grips when fluids are on the floor. A home workshop garage can be coated in a day.

Metallic epoxy is the decorative option, with hand-worked pearl, bronze or graphite pigments for offices, showrooms and basements. A polyaspartic topcoat protects each of the three finishes, and an anti-slip agent can be added to the final coat.

Interior of a clean, spacious commercial garage with a shiny polished floor and several parked cars.

From ground slab to polyaspartic topcoat

Grinding is the foundation of the job. Diamond tooling takes off old paint, coatings, stains, dirt and oil-soaked surface, and leaves an open profile that the primer can fuse into. Spilled fluids soak into bare concrete, and none of that can be left under a coating. Working slabs usually carry the most to remove, which is why this step gets the time it needs.

Cracks, holes and worn joints are repaired next, so they do not telegraph through the finished floor, and each one is made good before the primer goes down. Cove is an option where the floor meets a wall.

Primer, base coat and finish go on in turn, and a polyaspartic topcoat closes the floor, abrasion-resistant and glossy. It is UV-stable and resists yellowing, so the color you chose is the color you keep.

Bare concrete slab during preparation, before the coating goes down

Hanover Park epoxy floors and your free visit

We put epoxy floors into Hanover Park garages and basements and into commercial and light industrial space, with a crew of our own based at our Roselle shop. Evolve is owned and operated by a Marine Corps veteran, and we are licensed and insured. An extended warranty backs our craftsmanship, and military, veterans and first responders receive a discount. The visit is free: we look at the floor, recommend the finish and quote the job. To arrange it, call (630) 206-5602 or email info@evolveconcretecoating.com between 9 AM and 6 PM, Monday to Sunday.

Areas We Serve

Proudly delivering professional concrete coatings across these Illinois suburbs and surrounding communities.

Every Floor Starts With a FREE Estimate

Contact Us

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.