Epoxy Flooring Bensenville, IL

Seamless epoxy floors for Bensenville warehouses, trade units, shops and garages: a floor that takes wheeled traffic, spilled fluids and winter salt, installed by our own crew.

Epoxy flooring for Bensenville, layer by layer

An epoxy floor is a coating that bonds into your slab rather than sitting on it. A primer fuses into the ground concrete, a pigmented base coat follows, then the finish, and a clear polyaspartic topcoat seals the whole build against wear. The finished floor is hard and seamless, glossy or lightly textured depending on the finish.

Next to paint, tile, carpet or a bare slab, it is one sealed surface that goes onto the concrete you have, so there is no demolition and no covering to replace. It suits Bensenville's warehouses and trade units as well as houses with garages and basements, since only the finish changes while the system stays the same.

Low view across a gray epoxy flake garage floor toward the open door
Glossy black floor with swirling bright orange metallic epoxy coating in an empty room.

Where epoxy outlasts bare concrete in Bensenville

Built for impact and spills. The coating resists oil, chemicals, abrasion and impact, so dropped tools, pallet trucks and leaking vehicles mark it far less than bare concrete, which soaks up every spill. It also protects the slab from moisture and water damage, and the primer fuses into the concrete so the floor does not peel.

Easy upkeep and a long life. The seamless, non-porous surface sweeps and mops clean, with no waxing or stripping, and the UV-stable topcoat does not yellow or fade. Coated well, an epoxy floor can still look good fifteen to twenty years on, which makes it cost-effective against replacing or tiling a floor.

Choosing a finish for a Bensenville floor

Solid color epoxy is one uniform shade under a clear topcoat, and for a working unit it is the plain choice. It wipes clean, shows what has been dropped on it, and in a light tone it brightens a bay with little daylight. An anti-slip additive can go into the topcoat where fluids are likely.

Epoxy flake broadcasts colored flakes into the base coat, so the orange-peel texture grips and the blend hides the marks of a busy day, which suits a garage or a customer area. Metallic epoxy is a self-leveling resin worked by hand with mica pigments, a high-gloss floor for an office, showroom or finished basement.

Solid gray epoxy floor with a high-gloss finish in a warehouse
Bare concrete slab during preparation, before the coating goes down

Getting a Bensenville floor prepped, coated and quoted

The job begins with mechanical grinding to take off old paint, coatings and stains and open the pores, then repairs to cracks, holes and joints, with cove at the walls as an option. Primer, base coat, finish and polyaspartic topcoat follow. In Bensenville that covers commercial units and homes alike, and garages are coated in a day. Our crew works out of our shop in Roselle, and we are licensed and insured. Call (630) 206-5602 or email info@evolveconcretecoating.com and we will visit for free, look at the floor, recommend the finish and quote the job.

Areas We Serve

Proudly delivering professional concrete coatings across these Illinois suburbs and surrounding communities.

Every Floor Starts With a FREE Estimate

Contact Us

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.